Anchor™ Product Installation Tools

The Anchorplex™ retaining wall system offers a unique, nonconventional solution to problematic wall construction sites. It is a retaining wall built with Anchor™ products and self-compacting structural backfill specified by Anchor Wall Systems, and backed by engineering support tools developed by Anchor. When used in combination with blocks of the appropriate shape, the structural backfill attaches itself to the wall facing, effectively extending the depth and increasing the mass of the facing. In addition to reinforcing the block facing, the structural backfill zone also serves as the required drainage zone. Using the Anchorplex retaining wall system completely eliminates the need for the construction of a mechanically stabilized earth zone behind the wall facing and requires substantially less excavation than is usually necessary in grid-reinforced wall construction. Because of these efficiencies and the design flexibility afforded with the Anchorplex system, millions of square feet of such walls have been installed and are successfully performing worldwide. Information in this section is typical and should not be used for construction without the seal, when required, of a registered Professional Engineer in the state in which the wall will be constructed.

Basic information on how to cut retaining wall blocks.

How to add a finishing touch to a small retaining wall using cap units.

Learn how to build a retaining wall with an outside curve and quick tips for calculating the radius of the top course of the wall. Anchor Wall Systems offers a variety of retaining wall systems that can be used to enhance your hardscape project. Visit www.anchorwall.com for more information.

Follow these step-by-step animated instructions to learn how to build a retaining wall with an outside 90 degree corner. This video explains how to lay a base course and subsequent courses in a staggered bond. Visit www.anchorwall.com for more information.

Follow these step-by-step animated instructions to learn how to build a retaining wall with an inside 90 degree corner. This video explains how to lay a base course and subsequent courses in a staggered bond. Visit www.anchorwall.com for more information.

Learn how to build a retaining wall with an inside curve. Anchor Wall Systems offers a variety of retaining wall systems that can be used to enhance your hardscape project. Visit www.anchorwall.com for more information.

Discover how you can save time and money with improved jobsite efficiency by using the Torpedo® base block. This strong, functional block is a great foundation for use with Anchor™ freestanding and retaining wall products.

Add grand style to entrances and stairways with the Landings step unit, which emulates beautiful quarried limestone. The step unit features a unique “nesting” feature on the risers that allows the steps to be installed with a seamless joint for a landing, as well as smooth ends for longer tread.