Mantel 73 3244 6odnbjk14

Sinocom Development Project

​Traditional segmental retaining walls require significant excavation, but Anchorplex™ retaining wall system uses structural backfill and requires less excavation

Key Features

Wall Area

​2,100 square feet

Location

​King of Prussia, Pennsylvania

Manufacturer

​EP Henry
Woodbury, New Jersey

Wall Design Engineer

​Bart Shippee
Shippee Engineering, Inc.
Doylestown, Pennsylvania

Wall Contractor

​Pickering Valley Landscape, Inc.
Glenmoore, Pennsylvania

Sinocom Development Project Before
Sinocom Development Project After

The Challenge

​A site plan for a new parking lot next to a hillside included a design for a 10-foothigh retaining wall with a 2:1 slope on top of the wall. With a scant 12 feet of space between the proposed retaining wall and the adjacent property line, there wasn’t enough room for a conventional wall built with geosynthetic reinforcement.

The Solution

​The civil engineer working on the project contacted Bart Shippee, P.E., to discuss alternatives. Shippee recommended the Anchorplex™ retaining wall system because it requires little excavation and is designed to meet the engineering requirements of structural wall designs.

The Anchorplex system is a retaining wall built with Anchor™ products and structural backfill placed immediately behind the block. The unique system doesn’t require a large geosynthetic-reinforced stabilized earth zone behind the wall face, which means significantly less room is needed for excavation.

The solution was good news for the customer, a manufacturing company that had just expanded its warehouse and office park in densely populated King of Prussia, Pennsylvania, and needed additional parking space. The footprint for the parking lot was so tight that parked cars nearly touched the retaining wall.

“Designing and installing this Anchorplex retaining wall in a tight site is really the new reality of commercial development,” said Shippee, principal of Shippee Engineering. “Using a traditional segmental retaining wall system designed with grid doesn’t always work because the grid and necessary excavation push into the neighbor’s property. We kept the entire construction operation contained in the customer’s property using the Anchorplex system.”

Since the Anchorplex system can be installed with any Anchor product, Shippee recommended the Anchor Vertica® retaining wall system with a 2-degree batter, which also helped contain any possible encroachment on the neighboring lot.

While the property owner was thrilled with the engineering solution that let the parking lot be built, the best news came with the budget. A big-block system using 6,800-pound blocks was bid with a hefty price estimate. The Anchorplex system built with the Vertica product was bid and came in at about 77 percent of the big-block estimate. For the 2,100-square foot job, the savings were more than $10 per square foot.

The Results

​Segmental retaining walls continue to be cost-effective and efficient choices for commercial development. New features and enhancements like the Anchorplex system offer superior engineering performance with new efficiencies and benefits that save space and money for the customer, as is the case in King of Prussia, Pennsylvania.

Download PDF

top